BMW 2007 6 Series Owner's Manual page 52

Table of Contents

Advertisement

Seat, mirror and steering
wheel memory
You can store and select three different adjust-
ment settings for the driver's seat, exterior mir-
rors and steering wheel.
The adjustment of the lumbar support is not
stored in the memory.
Storing
1.
Switch on radio readiness or ignition, refer
to page 59.
2.
Adjust the desired seat, exterior mirror and
steering-wheel positions.
3.
Press the
button:
The LED in the button lights up.
Press the desired memory button 1, 2 or 3:
4.
The LED goes out.
Requesting
Do not request a position from the mem-
ory while the vehicle is moving. There is a
risk of accident from unexpected movement of
the seat or steering
wheel.<
Comfort mode
1.
Open the driver's door after unlocking or
switch on radio readiness, refer to page 59.
2.
Briefly press the desired memory button 1,
2 or 3.
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
50
Online Edition for Part no. 01 41 0 013 312 - © 02/07 BMW AG
The adjusting procedure for the steering wheel
is interrupted if you briefly press the switch for
the steering wheel adjustment in any direction,
refer to page 55.
Safety feature
1.
Close the driver's door and switch ignition
on or off, refer to page 59.
2.
Press the desired memory button 1, 2 or 3
and maintain pressure until the adjustment
process has been completed.
If the
button was pressed inadvertently:
press the button again; the LED goes out.
Activating with remote control
The last positions of the driver's seat, external
rearview mirrors, and steering wheel are stored
for the remote key currently in use.
You can choose when the position is requested:
>
Request when unlocking vehicle
>
Request when opening driver's door
When using this feature, always make
sure that the footwell behind the driver's
seat is empty and unobstructed. If you fail to do
so, any persons or objects behind the seat
could be injured or damaged by a rearward
movement of the
seat.<
The system cancels the adjustment procedure
when you briefly press one of the seat adjust-
ment switches or one of the memory buttons.
iDrive, for explanation of principle, refer to
page 16.
1.
Open the start menu.
2.
Press the controller to open the menu.
3.
Select "Settings" and press the controller.
4.
Select "Vehicle / Tires" and press the con-
troller.
5.
Change to upper field if necessary. Turn the
controller until "Door locks" is selected and
press the controller.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

650i

Table of Contents