Nova Precision Midi How To Service page 7

SuperNova2 – Reassembly
STEPS
Slide the scroll ring back into the
chuck body. Once in place, rotate the
scroll ring back and forth until it
engages with the jaw slides.
You should feel the scroll rings
4.
engage as it drops into place,
exposing the slot where the snap ring
will fit.
NOTE: Make sure that the jaw slides
do not move before sliding the scroll
ring in.
Apply a generous amount of lubricant
5.
on the geared side of the scroll ring.
Insert pinion gears back into the
6.
chuck body as shown in the image.
Continues to next page...
p.17
DESCRIPTION IMAGE