Advertisement
SuperNova2 – Reassembly
STEPS
Before reassembling the chuck, apply
a generous amount of lubricant to all
surfaces that come in contact with
other parts.
1.
We recommend applying the lubricant
(before assembly)
surface of the chuck body as well as
the jaw slide slots . Be sure to apply
lubricant on spiral teeth side.
Reinsert the jaw slides back into their
original slots.
2.
NOTE: The jaw slide number should
be counting up from 1~4 in the
clockwise direction (looking from
front)
Flip the chuck on its face and position
the jaw slides to form a square in the
3.
centre as shown.
Continues to next page...
p.16
DESCRIPTION
on the inner
IMAGE
Advertisement
