BMW 2006 5 Series Owner's Manual page 82

To hide these Check Control messages:
Press the CHECK button on turn signal lever.
Displaying stored Check Control
messages
1. Hold the button down:
The first stored message is displayed.
2. Press the button:
When the button is pressed again, a differ-
ent message is displayed.
Displaying additional information later
iDrive, for explanation of principle, refer to
page 16.
1. Press the button.
This opens the start menu.
2. Press the controller to open the menu.
3. Select "Service" and press the controller.
80
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG
4. Select "Check Control messages" and
press the controller.
5. Select a text message and press the con-
troller.
To exit the display:
Select the arrow and press the controller.
Indication of malfunction urgency
Depending on your vehicle's equipment, the
stored Check Control messages are also dis-
played with the following symbols:
No malfunctions are present in the moni-
tored systems.
Malfunctions are present in the moni-
tored systems. Depending on the mal-
function, supplementary information is
shown on the Control Display.