Trip Computer - BMW 2006 5 Series Owner's Manual

To reset average fuel consumption: press BC
button on turn signal lever for approx. 2 sec-
onds.
Displays on Control Display
You can also call up the computer via the iDrive.
For explanation of principle, refer to page 16.
1. Press the button.
This opens the start menu.
2. Move the controller to the right to open
"Navigation".
Without navigation system
Open "Car Data".
3. Select "Car Data" and press the controller.
4. Select "Onboard info" and press the con-
troller.
> Estimated time of arrival at destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system , refer to page 133.
> Cruising range
76
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG
>
>
>
Resetting values
You can reset the values for the average speed
and average fuel consumption:
*
:
1.
2.
Entering a distance manually
1.
2.
3.
The distance is automatically preset during the
destination guidance of the navigation sys-
tem

Trip computer*

The trip computer is suitable, for example, for a
vacation trip.
1.
2.
Distance to destination:
> Entering a distance manually in the com-
puter, see below.
> Entering a destination in the navigation
*
system , refer to page 133.
Average speed
Average fuel consumption
Select the respective menu item and press
the controller.
To confirm your selection, press the con-
troller again.
Select "Distance to dest." and press the
controller.
Turn the controller to select the distance to
your destination. If needed, hold it against a
slight resistance to enter a larger differ-
ence.
Press the controller to apply the setting.
*
.
Open the start menu.
Open "Navigation".
Without navigation system
Open "Car Data".
*
: