Table of Contents
Advertisement
Making calls with car phone:
BMW Assist calls
You can use the car phone via the hands-free
system for BMW Assist calls.
When the status information "Communication"
or "BMW Assist" is displayed in "BMW Ser-
vice", only BMW Assist calls are possible.
It may not be possible to establish a telephone
connection using the mobile phone while a con-
nection is being established to BMW Assist or
while a call to BMW Assist is already in
progress. If this happens, you must log off the
mobile phone from the vehicle if you wish to
place a call with the mobile phone.
Commissioning
Logging on mobile phone on vehicle
The following prerequisites must be met:
>
The mobile phone is ready to operate.
>
The Bluetooth link on the vehicle, refer to
page 177, and on the mobile phone is
active.
>
Depending on the mobile phone, preset-
tings on the mobile phone are necessary:
e.g. via the menu item Bluetooth activated
or the menu item Connection not with con-
firmation.
>
For logging on, specify any desired number
as the Bluetooth passkey, e.g. 1. This Blue-
tooth passkey is no longer required follow-
ing successful logon.
>
The ignition is switched on.
Only log on the mobile phone with the
vehicle stopped, otherwise the passen-
gers and other road user can be endangered
due to a lack of attentiveness on the part of the
driver.<
Online Edition for Part No. 01 41 0 012 211 - © 02/06 BMW AG
Switching on ignition
1.
Insert the remote control as far as possible
into the ignition lock.
2.
Switch on the switch on ignition by pressing
the Start/Stop button without depressing
the brake or clutch pedal.
Preparation with iDrive
iDrive, for explanation of principle, refer to
page 16.
1.
Press the
button to open the start
menu.
2.
Open the menu by pressing the controller.
3.
Select "Communication settings" and
press the controller.
4.
Select "Bluetooth" and press the controller.
5.
Select "Phone" and press the controller.
175
Advertisement
Chapters
Table of Contents
