Fujitsu ASYG09KMCDN Operation Manual page 16

■ State of indicator lamps
: The instruction is relating to the WLAN control.
Lighting pattern:
State
Automatic defrosting operation
⇒ Please wait until finishing the
defrosting (maximum of 15 minutes).
Filter indicator
⇒ Clean the air filter and reset the filter
sign.
(3 times)
Error code display
⇒ Consult authorized service personnel.
(Fast)
Timer setting error because of Auto
restart
⇒ Reset the clock and timer settings.
Test run operation (for authorized
personnel only)
⇒ Press
The power to the wireless router is
not on.
⇒ Check that the power to the wireless
router is on.
(Slow)
There is a possibility that the WLAN
adapter is not properly connected
to the wireless router.
⇒ Disconnect the power supply to the
air conditioner (via breaker or plug),
and then re-connect.
The software of the WLAN adapter
is being updated.
During the air conditioner registration
(pairing of WLAN adapter)
Restricted function
■ Manual Auto operation and Filter indicator
reset
You can operate the air conditioner with
indoor unit.
Status Time to keep pressing
In operation More than 3 seconds
Stopping 2 seconds or less
More than 3 seconds and
less than 10 seconds
More than 10 seconds
(Only for servicing.*
*1) To stop the forced cooling, press this button or
controller.
En-15
Blinking,
Causes and solutions
to quit the test run.
Mode or operation
Stop
Filter indicator reset
Auto
Forced cooling
1)
)
on the remote
Any state
See
page
13
12
-
13
3
-
7
-
9
13
on the