Setting The Local Area Code - GE CID User Manual

S L
ETTING THE OCAL
The Caller ID unit uses the programmed area
code to determine the number format to display
when a valid Caller ID signal is received and is
also used for the Dial Back feature.
1. To enter the Options menu, press the OPTION
button. OPTIONS MENU < > appears.
2. Press the right or left arrow button until LOCAL
AREA CODE appears.
3. Press the OPTION button to show the current
local area code. The default is ---. The first
digit flashes, indicating it is ready to accept the
area code entry.
4. Press the left arrow button to choose 9-0 for
the first digit.
14
A C
REA ODE
5. When the desired number is flashing, press the
right arrow button to advance to the next digit.
6. Repeat steps 4 and 5 until all the digits for your
area code are correct.
7. Press OPTION again to store the local area
code and return to the LOCAL AREA CODE
display.
NOTE: If you make a mistake while setting the local
area code, you can delete the displayed area code
by pressing the DELETE button.