Using The Ac Power Supply - GE CID User Manual

U AC P
SING THE
You must use the AC power supply
(included) to operate your Caller ID
unit. The unit is designed to retain
stored records after you
disconnect the adapter or during a
power failure.
CAUTION: Only use the ATLINKS USA
5-2484 or 5-2453 power supply that came with
this unit. Using other power supplies may
damage the unit.
10
S
OWER UPPLY
C
ONNECTING A TELEPHONE
1. To install this unit, disconnect your telephone
by removing the plug at the end of its line cord
from the existing telephone wall jack.
2. Plug the line cord from your telephone into the
jack marked TELEPHONE on this unit.
3. Plug one end of the line cord supplied with
your Caller ID unit into the jack marked LINE
on this unit.