Viking PSA-IP Product Manual page 12

Polycom Multicast Paging Tab
11. SIP Page Priority over Multicast Page
Incoming PSA-IP SIP call audio streams can be programmed to have priority over any of the 10 standard Multicast
paging groups. Simply use the "Sip Page Priority Level" drop down menu to select which Multicast group you want SIP
calls to have priority over. Factory Setting: "0" (SIP is highest priority).
When Polycom is selected as the Multicast Page Type, the "SIP Page Priority Level" can be set to "Polycom" or "None".
See the following tables for the order of priorities with each setting. As shown, Polycom Group 25 multicast is the
highest priority. The priority options allow you to determine the priorities for Polycom Groups 1 through 24 multicast
signals and SIP paging. Factory Setting: Polycom
Paging Priorities (SIP Page Priority Level set to Paging Priorities (SIP Page Priority Level set to
"Polycom") "None")
Polycom Group 25 Polycom Group 25
SIP Paging Polycom Groups 1-24
Polycom Groups 1-24 SIP Paging
12