Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for AirTies Air 4240
Summary of Contents for AirTies Air 4240
- Page 1 Поддержка 7/24 CD простой установки 8 800 100 02 80 8 800 507 44 40...
-
Page 2: Table Of Contents
URL Filters Back Panel 3.5.4 Anti-DoS Main Features INSTALLATION 3.6.1 Port Forwarding Installing the Air 4240 as an Access Point 3.6.2 2.1.1 Connecting the Cables for Access Point Mode 6 Routing 2.1.2 Connecting to the Air 4240 3.7.1Static Routing 2.1.3... -
Page 3: Safety And Maintenance 3 1.1 Minimum System Requirements
• Do not insert a PSTN (phone) plug into the LAN port. • If you encounter any problems, do not open or disassemble the device. Call AirTies Technical Support. • In order to prevent electric shock, do not operate the device in wet or damp areas. -
Page 4: Front Panel
Wireless Access Point, Repeater, or a Router. You can connect the AirTies Air4240 to a wired modem or router through one of the Ethernet ports to setup a wireless local network and enable your wireless computers to access the Internet. -
Page 5: Back Panel
Reset: Button to reset your device to default factory settings. (at the bottom of the device). INSTALLATION In Access Point mode, the Air 4240 provides wireless access capability on any network To reset the Air4240 to the default factory settings, while the device is on, press and hold the... -
Page 6: Connecting The Cables For Access Point Mode
2. Using the Ethernet cable provided, connect one of the LAN ports of the Air 4240 to the Ethernet port of your ADSL modem or an Ethernet port of a Switch on your wired network. - Page 7 The login screen will come up. You do not need a password to access the Web interface. Click “OK” to enter. 6. At the end of the search, a list of all AirTies products connected to your computer will be displayed.
- Page 8 3. In the Network Connections window, right-click on the network adapter from which you will connect to the Air 4240 (Wireless Network Connection, Local Area Connection) and select Properties. 4. Right-click on Internet Protocol (TCP/IP) and select Properties. 7. Click the OK button at the bottom of the window Windows Vista 1.
- Page 9 4 (TCP/IPv4). 4. In the window that comes up, right-click on the network adapter from which you will connect to the Air 4240 (Wireless Network Connection, Local Area Connection) and select Properties. 6. In the Internet Protocol version 4 (TCP/IPv4) window click on the Use the following IP address button and enter an address in the 192.168.2.1 –...
-
Page 10: Accessing The Advanced Settings With A Static Ip
Installing the Air In Router mode, the Air 4240 allows you to connect your entire wired network to the Internet wirelessly through a modem that does not have NAT or Firewall features. 4240 as a Router Note: How to change the mode of your device is explained in section 3.1 Operation Mode of... - Page 11 4. To complete the installation process, click “Finish” in the installation wizard. 6. At the end of the search, a list of all AirTies products connected to your computer will be displayed. Air 4240 5. Once the installation is complete, the AirTies Access Program will start looking for AirTies products that are connected to your computer.
-
Page 12: Advanced Settings
ADVANCED 3.2.2 Internet When you click INTERNET on the main menu of the Web interface, you will see Internet On this screen you can choose the operation mode of your device as either an Access Point Settings as the first submenu. Go to Internet Settings to configure the Internet settings of or Router. -
Page 13: Dns Settings
3.2.3 3.3.1 IP and DHCP Every client that is connected to your Air 4240 is given a local IP address. The module that DNS Settings DNS (Domain Name Service) is an Internet service that translates domain names into IP assigns these IP addresses is the DHCP (Dynamic Host Configuration Protocol) module. -
Page 14: Lan Clients
This section is for DHCP related settings. The settings you can change are the following: Stops all DHCP activity on the device. When in this mode, clients connected to the Air 4240 need to be assigned an IP address manually or they have to get an IP address from another DHCP server in order to communicate with the network. -
Page 15: Wireless Settings
3.4.2 Wireless Your AirTies router can be used as a wireless access point to set up a wireless hotspot. When you click the “WIRELESS” menu of your router’s Web interface, you will be in the With the 802.11g standard it supports, you can setup a wireless network with data rates of “Wireless Connections”... -
Page 16: Wireless Security Settings
MAC Address Filtering allows you to control which wireless terminals can connect to your AirTies device. Access to the device by unauthorized terminals is blocked. For your wireless network security, it is recommended that both MAC Address filtering and WPA2 wireless... - Page 17 WPA (Wi-Fi Protected Access) encryption standard is one of the current wireless encryption WEP Security Your Air 4240 supports WEP encryption in addition to the WPA and WPA2 encryption standards that provide a high level of data protection. All AirTies wireless products and standards.
-
Page 18: Mac Address Filtering
You can specify those clients that will be allowed access to your wireless network using AirTies Mesh Technology resolves the signal loss and limited coverage area problems often MAC Filtering. MAC Address Filtering is not required for wireless security, but it is encountered in multi-story, concrete buildings. - Page 19 To setup a Mesh Network with your device: 3. When you click the “Search AP” button, the Air 4240 will start searching for wireless access points to connect to within its range and list the access points detected. 1. Go to Wireless Setup under the WIRELESS menu of the Web interface. Select a channel for your “Mesh Network”...
-
Page 20: Firewall Settings
Settings o Enter a name for the application you are going to define in the “Application AirTies Firewall has SPI (Stateful Packet Inspection) feature. SPI monitors the protocol and Name” field. packet addresses being received to determine if the information should be passed through o Enter the LAN and WAN ports the application uses and click “Save”. -
Page 21: Mac Address Filtering
MAC Address Filtering allows you to restrict network access based on MAC addresses. When this feature is activated, the clients whose MAC addresses are on the list will have Filtering their access to the Air 4240 blocked. To restrict access based on MAC Address: •... -
Page 22: Nat
Network Address Translation (NAT) is a way to map an entire network (or networks) to a single IP address. NAT allows multiple clients in your local network to access the Internet th- rough a single global IP address (WAN IP) assigned to you by your Internet service provider. You can enable/disable NAT using the NAT menu of the Web user interface. -
Page 23: Dmz
After checking that all the values displayed The Air 4240 supports “static routing” where you specify the target IP addresses and how to are correct, check the “Enable Port Forwarding” box. Then, click “Save”. -
Page 24: Management
Management 3.8.2 Remote The MANAGEMENT menu of the Web interface lets you configure local and remote To configure the settings related to the remote management of your device, go to Remote management settings of your device. Management under the MANAGEMENT menu. Management To enable remote management of your device, first click the “Enable Remote Manage- ment”... -
Page 25: Ddns
After saving, the WAN IP address you have entered will appear in the “IP Access List”. If you select this address from the list and click “Save”, remote management will be activated 3.9.1 Password To configure the DDNS settings of your device, go to DDNS Settings under the DDNS menu for this address. -
Page 26: Tools
• The “Restart” button restarts the device remotely. During this operation, your connection to the Air 4240 will be lost. You can reconnect after the device comes back up. • The “Restore Factory Defaults” button allows you to reset the device back to factory defaults remotely. -
Page 27: System Logs
3.11.1 System Logs Technical • Ports: Power (9V DC), 5 x 10/100 Ethernet(RJ-45, auto MDI/MDIX) The System Logs under the REPORTS menu displays detailed system logs about system activity and the applications that were active since the device was last started. •... - Page 28 Поддержка 7/24 CD простой установки Гарантия 3 года 8 800 100 02 80 8 800 507 44 40 Гарантия 3 года Поддержка 7/24 новки Гарантия 3 года 8 800 100 02 80 8 800 507 44 40...