Galaxy Innovations ComboF User Manual page 8

UNIVERSAL:

22K:

Pwr:

None:

Fixed:

5.2.1 USALS Setting:
Press [OK] to enter USALS SETUP menu on Position
Type if the type sets to USALS parameters
042.0°E Turksat3/4A:

My Longitude:

My Latitude:

Move to center:

Move to position:

5.2.2 Diseqc 1.2 Setting:
Press [OK] to enter Diseqc 1.2 setting menu on
Position Type if the type sets to Diseqc 1.2
User`s Manual
to move curse and [/] to change value of each focused
item in edit menu.
The LNB type. Press [/] to switch between LNB types and
press [OK] to enter list to select type.
The 22k parameter. Press [/] button to switch between
Auto, Off and On.
The power parameter of the LNB. Press [/] button to
switch between Auto, Off, 13v
The Diseqc port setting for Diseqc 1.0 and 1.1. Press [/]
button to switch between ports or press [OK] button to select
port in the list.
Set the motor type. Press [/] to switch between Fixed,
USALS and Diseqc 1.2.
The current satellite. Press [/] to switch between satellites
and press [OK] to enter satellite list to select satellite. Press [OK]
button to select the focused satellite and press [MENU] to exit
from edit menu. All the other parameters on the menu will be
refreshed according to the selected satellite.
The longitude of local. Press [OK] to enter edit mode, then
press [/] to change the value and [/] to move curse.
Press [OK] again to exit edit mode
The latitude of local. Press [OK] to enter edit mode, then
press [/] to change the value and [/] to move curse.
Press [OK] again to exit edit mode
Press [OK] to move the dish to central position.
Press [OK] to confirm to move to setting position
6/18
and 18v.