Honda Civic 2016 Service Bulletin page 16

2. With the shift lever in Drive or Neutral, press the brake pedal and come to a complete stop. The HOLD indicator
in the instrument panel comes on. Braking is kept for up to 10 minutes. Release the brake pedal after the
indicator comes on.
3. To cancel the system and start moving, press the accelerator pedal (CVT models) or shift into gear and release
the clutch pedal (M/T models). The HOLD indicator goes off.
4. To turn off the system, press the brake pedal and press the BRAKE HOLD button again. The BRAKE HOLD
indicator goes off.
The system automatically cancels under these conditions:
•
The EPB is engaged.
•
Braking is kept for more than 10 minutes.
•
The driver's seat belt is unbuckled.
•
The engine is turned off.
•
There is a problem with the automatic brake hold system.
•
The battery is disconnected.
•
The brake pedal is pressed and the shift lever is moved to Park or Reverse (CVT models)
•
The engine stalls (M/T models).
For more details on this system, see the owner's manual.
7.
Capless Fueling System
This model does not have a fuel fill cap. The system is sealed with an internal flapper. To fuel the vehicle, just insert the
filler nozzle directly into the filler neck. The fuel tank seals itself again when you pull out the filler nozzle.
A funnel is included to allow manual refueling from a portable fuel container. It is stored in the tool case in the trunk.
For more information, see the owner's manual.
Page 16 of 16