Honda Civic 2016 Service Bulletin page 10

13.
Activate the Audio System and Set the AM/FM Audio Unit Presets
Models Without Navigation
1. After installing the No. 18 BACKUP (10 A) fuse, turn the ignition to ON, then press and hold the audio system
power button for at least 2 seconds. This synchronizes the audio system with the vehicle and initializes it
for use.
NOTE: You may see the factory In Line Diag screen. If so, follow these steps to complete the in-line diagnosis.
If not, skip them and go to step 2.
• Select Start Diag.
• Press all of the buttons on the steering wheel that you see on the screen. The icons should turn green.
• Make a loud sound (like snapping your fingers or clapping your hands) next to the microphone to complete
the mic test.
• When you have completed all of the tests, the icons will be green. Select Exit Diag to exit the screen.
• Turn the ignition to OFF, then to ON, to make sure the In Line Diag screen does not reappear.
2. Enter a local AM or FM station on all of the audio unit presets. To enter a station, tune to it, change the screen
to the preset screen, then press and hold the preset number that you want that station stored at.
Models with Navigation
1. Do S/B 15-071, 2016 Civic: PDI of the Navigation System.
2. Enter a local AM or FM station on all of the audio unit presets. To enter a station, tune to it, change the screen to
the preset screen, then press and hold the preset number that you want that station stored at.
14.
Set the Clock
Models with Navigation
The navigation system receives signals from GPS satellites, updating the clock automatically.
Models Without Navigation
Models Without Display Audio
1. Turn the ignition to ON.
2. Press the MENU/CLOCK button. The Adjust Clock screen comes up.
3. Turn the selector knob to adjust the hour, then push in the knob.
4. Turn the selector knob to adjust the minutes, then push in the knob.
Page 10 of 16