Canon ImageFormula DR-M140 User Manual page 51

2)
Not available for setting if either one of the following two conditions are met.
• [Detection mode] in the [Auto Image Type Detection Settings] dialog box is set to [Color or Gray]
• [Mode in case of binary] in the [Settings for in case of binary] tab is set to [Error Diffusion]
3)
Not available for setting if [Detection mode] is set to [Color or Gray] in the [Auto Image Type Detection Settings] dialog box.
Some of the setting items are disabled as follows depending on the setting for [Color Mode] in the settings screen of the scanner driver.
Simple Mode
Setting value
Detect automatically
Black and White
Error Diffusion
Advanced Text Enhancement II
256-level Gray
24-bit Color
O: Available for setting X: Not available for setting
Advanced Mode
Setting value
Detect automatically
Black and White
Error Diffusion
Advanced Text Enhancement II
256-level Gray
24-bit Color
O: Available for setting X: Not available for setting
Check the image of the
first page
X
O
O
O
O
O
Enable Back Side Enable Back Side
Brightness Contrast
O
O
O
X
O
O
51
Check the image of the
first page
O X
O O
O O
X O
O O
O O