Product Description And Intended Use; Safety Instructions - FIAM. HYPE extendible HP-AL180 Product Information

HYPE Table extendible
EN
Art. HP-AL180 - HP-AL200
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.

Product description and intended use

1
• Product description and composition
The HYPE Table extendible - Art. Code HP-AL180 - HP-AL200 is a Table extendible intended as an item of indoor furniture. It is
manufactured from float plate glass. The HYPE Table extendible was produced at the FIAM ITALIA S.r.l. factory at Via Ancona 1/B,
61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as HYPE is designed and built to serve as a Table extendible for indoor use and must therefore be used only
for this purpose and no other.
For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

Safety instructions

2
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the HYPE Table extendible in the original packaging
The HYPE Table extendible, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking.
It must be stored indoors in a dry place.
Place the HYPE Table extendible in the original packaging, in the horizontal position. The arrows on the label on the packaging
must be vertical and pointing upward.
The HYPE Table extendible in the original packaging weighs 216 kg ( tot. 3 packages )
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the HYPE Table extendible, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the HYPE Table extendible.
15/24