EAW UB42 Installation Instructions

Installation Instructions

UB42 BRACKET

1. Inventory

Before beginning installation, inventory kit to items listed.
Item EAW P/N Qty
1 606130
2 102017
3 105061
4 105007
5 105008
WARNING: Installation should only be done by an experienced technician. Improper installation may cause
serious injury. The surface where the bracket/cabinet is to be fastened must have enough structural integrity
to support 150 pounds.

2. Mounting the Bracket

Due to various construction methods and materials used today, the hardware for securing the
bracket to the mounting surface is not supplied. It is recommended that you consult a building
professional for the proper mounting hardware before mounting the bracket.

3. Removing the Shipping Hardware

Remove the three flat head screws
from the top and sides
of the cabinet using a
5/32 Allen wrench.

4. Hanging the Cabinet

A. Holding the
cabinet in position,
insert the screw with
its lock washer and flat
washer through the
bracket's right side arm
hole then through the
neoprene washer and
into the cabinet's threaded
mounting hole and hand
tighten.
B. Repeat step A through
the left bracket hole.
C. Repeat step A through the
top bracket hole.
D. Tighten the three
screws with a 3/16
Allen wrench.
1 Main Street • Whitinsville, MA 01588 • Phone (800) 992-5013 • FAX (508) 234-8251
Description
1 Bracket
3 Screw, 1/4-20 x 1 SHCS, Black
3 Washer, Neoprene, 1/4 I.D. X 1.0 O.D.
3 1/4 Washer, Flat, Black
3 1/4 Washer, Lock, Black
4
(3) SCREW 1/4-20 X 1
SHCS 18-8 BLK
EAW P/N 102017
(3) FLAT WASHER 1/4
EAW P/N 105007
3
UB42
EAW DWG NO 480357 (0)
4
MOUNTING BRACKET
UB42 EAW P/N 606130
3
2
4
(3) LOCK
WASHERS 1/4
EAW P/N 105008
(2) NEOPRENE WASHERS
EAW P/N 105061
3
EASTERN ACOUSTIC WORKS