Table of Contents
Advertisement
charging extension cable. This is Not Recommended. Using it
this way could lead to permanent damage to the unit.
6. Adjust the lens position to ensure that the lens is level with
the ground
7. Tighten the dash cam position by using the Angle tighten
Knob (4 in diagram above) to get the desired angle of the dash
cam
8. Install the second camera on the rear of the vehicle, side of
the vehicle, or facing the driver. The wiring can be laid along
the roof of the vehicle if needed. After installation, connect the
plug to the second camera port of the Dash Cam
5
Advertisement
Table of Contents
