Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for Elo TouchSystems EM10
- Page 1 Dash Cam Manual Model EM10...
-
Page 2: Table Of Contents
Table of Contents Dash Cam Diagram Installation Guide Features Basic Functions of the Dash Cam Power On/Off | Turn On/Off screen | Reset UI of the Dash Cam Camera DVR FM Transmitter App List Camera Playback Settings Product Specifications... -
Page 3: Dash Cam Diagram
Dash Cam Diagram 1: Sim card port 2: SD card port 3: Reset 4: Angle Tighten Knob 5: Power button 6: Touch screen 7: Second camera port 8: USB connection 9: GPS antenna... -
Page 4: Installation Guide
Installation Guide 1. Turn off the engine of the vehicle 2. Unit comes with a 64GB SD Card which will be already in the SD card slot [Note] If the user needs to replace this SD card, please take out the current SD card and insert new card into the SD card port. - Page 5 charging extension cable. This is Not Recommended. Using it this way could lead to permanent damage to the unit. 6. Adjust the lens position to ensure that the lens is level with the ground 7. Tighten the dash cam position by using the Angle tighten Knob (4 in diagram above) to get the desired angle of the dash 8.
-
Page 6: Features
Features Automatic Locked Files A file is automatically locked and sent to the portal if the collision sensitivity is met. The upload will happen on the background as long as the camera is powered on. Even if powered off- the moment it gets power the locked file will start uploading again. - Page 7 Loop Recording Once the memory of the dash cam has been reached new video is automatically saved over the oldest video files. 1080P Front Camera & AHD for Second Camera High quality video footage saved. Standalone 4G LTE Dash Cam This dash cam does not require any use of smart phone in order to view video files.
-
Page 8: Basic Functions Of The Dash Cam
Basic Functions of the dash cam Power on/off function A: In the powered-on state, long press the power button and hold for 3 seconds, the unit will automatically save the current video file and shut down; B: In the power-off state, long press the power button and hold for 3 seconds for turning on the unit. -
Page 9: Ui Of The Dash Cam
The UI of the dash cam The dash cam is touchscreen. Use a finger for navigation and clicking. The above UI is the home screen. The items on the home screen are described further below: Enters the recording interface which shows what is currently being recorded by the dash cam Lists out the current videos that are available on the dash cam... - Page 10 means the video is being recorded with a voice recording, while clicking on it again toggles it to which means the video is not doing a voice recording. Takes the user to the settings below: to go back to the home page to go back to the previous page...
-
Page 11: Camera Dvr
Camera DVR: The UI above is what is seen when clicking on the Camera DVR app. Red Dot on the top left indicates that the video is being recorded. The Preview icon is to switch between viewing the front camera and the second camera. Clicking on the Camera Icon will take a picture. -
Page 12: Fm Transmitter
FM transmitter After clicking on the FM function, the frequency can be adjusted manually. (note - turn on the radio first and adjust to an empty frequency band without sound) Turn on the radio on the truck and adjust to the corresponding frequency, then the FM function can be used normally. -
Page 13: App List
App List The app list stores all the apps that are downloaded by the user on the dash cam, along with a pre-installed set of apps. To add apps please go into the play store (labeled “Play”) and input your google account to download a new app. Apps cannot be deleted once downloaded. -
Page 14: Camera Playback
Camera Playback Long press the video for choosing “Lock/delete/Cancel”. If moved to the lock tab this video will stay on the dash cam at all times. However, it will not be uploaded to the back-end portal. Only locked files as described in the Features section get automatically uploaded to the back-end portal. -
Page 15: Settings
Settings Clicking on the setting icon, will enter the view as shown in section V. The view below is for more settings: Network & Internet: When clicking on the open/off button in the Network & Internet, a user can open the WiFi function. - Page 16 Off, the G sensor and CPU will not work. When it is On, the unit will be switched to Park mode after shutting off. The device will enter sleep mode after parking, and if there is a shake during the parking period, the device will automatically wake up and record for one minute (the screen will not light up) and then continue to be in sleep mode after that.
- Page 17 ways for the user to choosing the way to adjust the correct time, use network-provided time, use GPS-provided time and automatic time zone Change Automatic Sensitivity Go to DVR Camera. Then click on the settings icon. From here user can select the sensitivity of the collision detection.
-
Page 18: Product Specifications
Product Specifications Processor & Memory characteristics Processor type Quad-core 2 GB eMMC Flash 16 GB Functional characteristics Display MIPI 4.39 inch screen Display resolution 640 * 360 pixels 1 USB 2.0 (power supply: DC5V / 3A) 1 SIM card slot, support MICRO SIM card Expansion memory card: TF card/SD card capacity External I / O port supports up to 128 GB... - Page 19 Language support Multi-language G-SENSOR X/Y/Z Axis - Triaxial Loop recording Support, seamless recording recording function Support Time watermark Support Front camera video Supports up to 1920 x 1080 (1080P 25 f/s) or 1280 x 720 quality (720p 25 f/s) Second camera AHD Camera video quality ©...