Table of Contents
Advertisement
Installation Guide
1. Turn off the engine of the vehicle
2. Unit comes with a 64GB SD Card which will be already in
the SD card slot
[Note] If the user needs to replace this SD card, please take
out the current SD card and insert new card into the SD card
port. Please use a high-speed SD card (Class 10 or higher). The
storage should be 2GB or more, and up to 128 GB
3. Clean the windshield glass from inside the truck with an
alcohol wipe or the cleaning rag provided in the package
4. Remove the Plastic Film over the 3M sticker, and place the
Dash Cam near the rear-view mirror of the truck. Hold for 5
seconds to keep in place
5. Connect the ACC cable with the Automotive Fuse Box
[Note] When wiring, the charging extension line can be laid
along the edge of the car windshield
[Optional] Dash Cam can also be connected with the cigarette
lighter charger to the USB port of the dash cam with a
4
Advertisement
Table of Contents
