Related Manuals for SignWarehouse ENDURAPRESS CS15
Summary of Contents for SignWarehouse ENDURAPRESS CS15
- Page 1 CS15 USER MANUAL REV 04/06/2021 www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us...
-
Page 2: Table Of Contents
Table of Contents Page Specifications Operation Instructions Read Before Use Control Panel Operations Temperature display calibration Heat Transfer Application Guidelines Troubleshooting Tips Wiring Schematic www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 3: Specifications
Model NO: ENDURAPRESS CS15 Voltage: 110V/60Hz Power: 11.4Kw Control Panel: LCD Control Panel Time Range: 0~999sec. Temp. Range: 0~480°F Packaging: Corrugated Paper Carton Gross Weight: 75lbs (33kg) www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 4: Operation Instructions Read Before Use
Setting the pressure excessively high can damage the press. 10. The heat press carries a ground line by default, please make sure the socket gets a ground line protector. www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 5: Control Panel Operations
Long hold the CLEAR button to clear start to cool down if heat press is your counter on the panel. inactive To reheat the press, hit any button www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 6: Temperature Display Calibration
Say 30 (i.e. heating platen 260°F, and the press will cool down 30°F hotter than the gauge read- to 230°F. out) www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 7: Heat Transfer Application Guidelines
335°F 12sec. 50Psi ** The EnduraPRESS CS15, CS15-AR, CS16, and CS16-AR are not recommended for use with two-step laser transfer papers. For these demanding applications, we recommend the EnduraPRESS SA12 or SD20. www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 •... -
Page 8: Troubleshooting Tips
Pressure: If the temperature is correct, adjust the pressure. Some films require more pressure to bond the adhesive to the fabric. There should be some resistance when you close the press. If you have verified all of these and the film doesn’t stick, contact SIGNWarehouse customer service or Technical Support for further assistance. -
Page 9: Wiring Schematic
Thank you for choosing our products, you are entitled to one year free warranty service for our products. All exceeds warranty period we will still provide technical supports and maintenance guidance. www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us...
Need help?
Do you have a question about the ENDURAPRESS CS15 and is the answer not in the manual?
Questions and answers