Subscribe to Our Youtube Channel
Related Manuals for SignWarehouse enduraPRESS MP5
Summary of Contents for SignWarehouse enduraPRESS MP5
- Page 1 USER MANUAL REV 04/06/2021 www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us...
-
Page 2: Table Of Contents
Operation Instructions Read Before Use Control Panel Operations Temperature display calibration Different Fittings and Changing The Fittings Heat Transfer Application Guidelines Troubleshooting Tips Wiring Schematic www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 3: Specifications
Model NO: ENDURAPRESS MP5 Voltage: 110V/60Hz/320w Power: Control Panel: LCD Control Panel Time Range: 0~999sec. Temp. Range: 0~480°F Packaging: Double-walled Corrugated Paper Carton Gross Weight: 13lbs (6kg) www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 4: Operation Instructions Read Before Use
7. Do not set the temperature any higher than 480F as it may cause over heat and stop working. 8. The heat press carries a ground line by default, please make sure the socket gets a ground line protector. www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 5: Control Panel Operations
Long hold the CLEAR button to clear start to cool down if heat press is your counter on the panel. inactive To reheat the press, hit any button www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 6: Temperature Display Calibration
Say 30 (i.e. heating platen 260°F, and the press will cool down 30°F hotter than the gauge read- to 230°F. out) www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... - Page 7 Optional Mug Fittings SignWarehouse has fittings that will fit mugs from 2.5oz to 15oz standard mugs and two conical fittings for latte mugs and other tapered drinking vessels. 2.5oz fitting 10oz fitting 17oz fitting...
-
Page 8: Heat Transfer Application Guidelines
* Laser transfers for mugs and tumblers require special self-weeding laser transfer paper for hard surface applications. ** Laser transfers for apparel require special one or two-step self-weeding transfer papers www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us... -
Page 9: Troubleshooting Tips
Pressure: If the temperature is correct, adjust the pressure. Some films require more pressure to bond the adhesive to the fabric. There should be some resistance when you close the press. If you have verified all of these and the film doesn’t stick, contact SIGNWarehouse customer service or Technical Support for further assistance. -
Page 10: Wiring Schematic
Thank you for choosing our products, you are entitled to one year free warranty service for our products. All exceeds warranty period we will still provide technical supports and maintenance guidance. www.signwarehouse.com • SignWarehouse, Inc. • 2614 Texoma Drive, Denison, TX 75020 • support@signwarehouse.com • signwarehouse.com/pages/contact-us...
Need help?
Do you have a question about the enduraPRESS MP5 and is the answer not in the manual?
Questions and answers