Table of Contents
Advertisement
When the fan heater turn over, the tip over switch will cut out automatically
Put again the Fan heater in vertical position to restart working.
Thermal Security
1. To avoid risk to human being or damage to internal components, the fan heater
has a security system which will automatically switch off the appliance if the
heat reaches the safety limit.
2. If overheating occurs:
Turn the switch to "O" position, and remove the plug from the socket.
Check if the air flows smoothly before the outlet and inlet, and if the
appliance is put in right position. If so, get it in order before restart the
appliance.
Let the fan heater cool down for 8 to 10 minutes before you start it again.
Plug in the appliance and switch it on.
Note : If the appliance cannot operate normally, remove the plug immediately
from the socket and have the fan heater serviced by an appointed service only.
1. Before cleaning the appliance, turn off the heater first, then remove the plug
from the socket, and wait until the appliance cools down.
2. Clean the air inlet and air outlet of the appliance regularly (at least twice a year
normally even with vacuum cleaner).
3. Use a damp cloth to clean the surface of appliance, avoid water going inside
the appliance, dry the appliance before use or store.
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place.
Before being delivered, all our products are subjected to a rigorous control.
This apparatus is guaranteed 24 months starting from the date of purchase by the
consumer.
VERY IMPORTANT
Tip over switch Security System
CLEANING AND MAINTENANCE
STORAGE
GUARANTEE
9
Advertisement
Table of Contents
