Safety Device; Cleaning And Maintenance - TECHWOOD TCG-1200 Instruction Manual

 Unroll the power cord completely.
 Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
 Connect the apparatus in a correct socket-outlet, (and connected to the
ground if the unit is Class I), to avoid any danger.
 Check that the outlet has at least a 10-AMPERE current carrying capacity.
 Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
 Never modify the appliance in anyway.
 The unit has two selector switches.
 Each switch controls a power of 400W
 If the three switches are in the ON position, the power will be 1200W.
 This item is provided with a safety device.
 The safety device disconnects the apparatus when it is tilted or if it toggles.
 A switch under the appliance switches off during tilting.
 For the heater working again, raise and place it on its base.
Before cleaning, always: switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
Never plunge the apparatus in water or all other liquid!
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place and out of reach from children.
USE

SAFETY DEVICE

CLEANING AND MAINTENANCE

STORAGE
8