Advertisement
DIMENSIONAL DRAWINGS
DIMENSIONAL DRAWING
CABINET TO BE SYMETRICAL ABOUT CENTERLINE DESIGNATIONS.
BH625P
3/8"-16 THREADED MOUNTING HOLES
CENTER OF BALANCE
6.00
FRONT
BACK
510047
EXP3/19/97 SHB
Acoustic Performance Partnership
One Main Street, Whitinsville MA, 01588 USA • Phone 508/234-6158 • Toll Free 800/992-5013 • Fax 508/234-8251 • Web http://www.eaw.com • email info@eaw.com
TECHNICAL SPECIFICATIONS BV625
3.25
19.5
SIDES
19.75
(1.88)
16
TOP/BOTTOM
Eastern Acoustic Works
SERVICE ITEMS
LF: Complete Cone Driver
EAW Part No.
804071
Filter/Crossover Network: Complete Assembly
EAW Part No.
201353
ARCHITECTURAL SPECIFICATIONS
The low frequency loudspeaker systems shall incorporate 2x
15-in LF transducers. Each LF driver shall be mounted in
separate vented subenclosure tuned for optimum low fre-
quency response.
System frequency response shall vary no more than 3 dB
from 50 Hz to 500 Hz measured on axis. The loudspeaker
shall produce a Sound Pressure Level (SPL) of 101 dB SPL on
axis at 1 meter with a power input of 1 Watt, and shall be
capable of producing a peak output of 137 SPL on axis at 1
meter. The loudspeaker shall handle 1000 Watts of amplifier
power (AES Standard) and shall have a nominal impedance
of 4 (2x 8) Ohms.
The loudspeaker enclosure shall be rectangular in shape. It
shall be constructed of 15mm thickness void-free cross-grain-
laminated Baltic birch plywood and shall employ extensive
internal bracing. It shall be finished in black catalyzed poly-
urethane. Input connectors shall be a four-terminal barrier
strip. A total of sixteen 3/8"-16 threaded mounting/suspen-
sion points (4 each top, bottom, sides) shall be provided.
The front of the loudspeaker shall be covered with a vinyl
coated perforated steel grill.
The low frequency loudspeaker shall be the EAW model BV625.
BV625
Advertisement
