panthera 4236000 Assembly Instructions

Assembly of lateral support
1)
Loosen the upholstery and fold it away
4)
Place the wheelchair on its side with the back
folded up, insert the "ratchet lateral support"
(fig.1 pos 6)in the respective back tubes and
fasten with screw and spacer (Fig 1 pos 7,8) with
allan key 4 mm. The ratchet is also used to adjust
the height of the lateral support.
Panthera AB, Gunnebogatan 26, SE-163 53 Spånga, Sweden, +46-8-761 50 40, www.panthera.se
ASSEMBLY INSTRUCTIONS
LATERAL SUPPORT BAMBINO 3
Assembly instructions for:
Art no: 4236000 Lateral support adjustable cpl
Tool needed:
Allen key 3mm
Allen key 4 mm
Torx T20
Thin flat head screwdriver.
2)
Take of the upper part of the upholstery
which is mounted with 2 pieces of torx screws on
each side.
Fig. 1
3)
Remove the plugs on top of the back tubes.
Most easily performed with a thin screwdriver.
art.nr. 8822127
Rev.2020-12