Product Description And Intended Use; Safety Instructions - FIAM. BIG WAVE BW-TR240 Product Information

BIG WAVE Table
EN
Art. BW-TR240 - BW-TR300 - BW-CO240 - BW-CO300
Read this information carefully before using the product and keep it for
future reference. Failure to comply carefully with the instructions which
follow may put the safety of the product and its users at risk.

Product description and intended use

1
• Product description and composition
The BIG WAVE Table - Art. Code BW-TR240 - BW-TR300 - BW-CO240 - BW-CO300 is a Table intended as an item of indoor
furniture. It is manufactured from float plate glass. The BIG WAVE Table was produced at the FIAM ITALIA S.r.l. factory at Via
Ancona 1/B, 61010 Tavullia (PU), Italy - Tel: +39.0721.20051 - Fax: +39.0721.202432 - www.fiamitalia.it
• Intended use
The article known as BIG WAVE is designed and built to serve as a Table for indoor use and must therefore be used only for this
purpose and no other.
For more information about the product's intended use please refer to section "2) SAFETY INSTRUCTIONS".

Safety instructions

2
To ensure that our product is used in the conditions of the utmost safety, we urge you to comply with the safety instructions
provided below. If in doubt or if you require further information concerning the use of the product, please contact us on the
telephone numbers stated in this document.
• Transporting and storing the BIG WAVE Table in the original packaging
The BIG WAVE Table, in its original packaging, must be transported taking the greatest care to prevent knocks and shaking. It
must be stored indoors in a dry place.
Place the BIG WAVE Table in the original packaging, in the horizontal position. The arrows on the label on the packaging must be
vertical and pointing upward.
The BIG WAVE Table in the original packaging weighs 373 kg ( tot. 4 packages )
It must therefore be placed on surfaces capable of supporting its weight.
• Removing the packaging - assembly
To remove the original packaging of the BIG WAVE Table, proceed as follows.
a) Place the packaging crate horizontal. The arrows on the labels on the outside must be vertical and pointing upward.
b) Open the packaging crate and remove the sheets of polystyrene. Do not use hammers, saws, cutters or other tools which may
damage the BIG WAVE Table.
11/24