Singer 6199 Instruction Manual page 13

(C)
3
4
5
C. Thread the machine with your left hand while firmly gripping the thread with your
right hand in the following order as illustrated.
* Pass the thread through the thread take-up (3) from right to left.
* Pass the thread through the eye of the needle (5) from front to back.
(See following page for instructions on operation of the Automatic Needle Threader.)
IMPORTANT: To verify that the machine is threaded properly in the tension
discs, do this simple check:
● With the presser foot raised and the needle threaded, pull the thread. You should
detect only a slight resistance and little or no deflection of the needle.
● Now lower the presser foot and again pull the thread towards the back of the
machine.This time you should detect a considerable amount of resistance and much
more deflection of the needle. If you do not detect the resistance, this means you
have not threaded the machine correctly and need to rethread it.
1
2
11