Professional installation required. The radio equipment described in this guide emits radio frequency
energy. Although the power level is low, the concentrated energy from a directional antenna may pose a
Do not allow people to come closer than 1.12 meters, (3.7 feet) to the antenna when the transmitter is
operating with a unity gain antenna.
This is an RF amplifier, the maximum ERP for this FCC band is 500 watts, this equates to an RF safety
distance of 3.82 meters.
Please consult the FCC website below for RF safety distances, using different antenna gain configurations
which affect the ERP.
More information on RF exposure can be found on the Internet at:
This device is offered as a licensed Amplifier per FCC Part, 90. It is approved for use under the following
conditions: Changes or modifications not expressly approved by GE MDS will void the user's authority to
operate the equipment.
For FCC Part 90, valid frequencies are 896-940 MHz at up to 500 Watts ERP
Caution; Only use authorized antennas that meet the FCC license requirements.
Use of unauthorized antennas, cables, and/or coupling devices not conforming
with ERP/EIRP for outdoor/indoor will void the licensee's license to operate.
WARNING: This is NOT a CONSUMER device. It is designed for installation by an installer
approved by an ISED licensee. You MUST have an ISED LICENCE or the express consent of an
ISED licensee to operate this device.
AVERTISSEMENT: ce n'est PAS un appareil CONSOMMATEUR. Il est conçu pour être installé
par un installateur approuvé par un titulaire de licence ISED. Vous devez avoir une LICENCE
ISED ou le consentement exprès d'un titulaire de licence ISED pour utiliser cet appareil.
1.1 RF Exposure
1.2 FCC Approval Notice
1.3 FCC Part 90 Information