Table of Contents
Advertisement
4. List of Error codes
E001: Tuner Error.
E002: EEPROM Error.
E003: RF Error.
E004: BT864 Error.
E005: L64005 Error.
E006: DRAM Error.
E007: STV0056 Error.
E008: ATuner Error.
5. Trouble Shooting
There may be various reasons for the abnormal operation of the receiver. Check the receiver
according to the procedures shown below.
If the receiver does not work properly after checking it, please contact the dealer. Don's open
the receiver cover. It may cause a dangerous situation.
5.1. trouble shooting
Symptom
The display on front
Panel does not light up.
No picture or sound.
No picture.
Cause
The power cord is
Not plugged in
Wrong connection of
The Audio/Video output
Of the receiver to TV.
Audio muting.
TV power off.
The receiver can't
Receive the signal.
Incorrect values of some
Tuner parameters.
Wrong direction of
the dish
Remedy
Check that the power cord
Is plugged in to the wall outlet.
Connect the Audio/Video
Output of the receiver to
TV correctly
Press the MUTE button.
Tum TV on.
Check the antenna cable,
Replace the cable, or connect
The cable to the receiver tightly.
Set the values of tuner
Parameters correctly in
System set-up menu.
Check the signal strength
With a spectrum analyzer and
Adjust your dish correctly.
Advertisement
Table of Contents
