Page 4
Supplied by STRONG Austria Represented by STRONG Ges.m.b.H. Franz-Josefs-Kai 1 1010 Vienna Austria Email: support_at@strong.tv 03 Jun 2019 17:50...
TABLE OF CONTENTS 1. SAFETY INSTRUCTIONS 2. REMOTE CONTROL 3. INSTALLING THE BATTERIES 4. USING THE REMOTE CONTROL AND USB ADAPTER 5. GENERAL DATA 1. SAFETY INSTRUCTIONS Read all of the instructions before operating the remote. Keep these instructions well for later use. Do not expose this remote and dongle to rain or moisture.
2. REMOTE CONTROL Fig. 1 Turns the receiver ON/Standby Turns the sound on or off. 3. ASPECT Switches between the screen settings “AUTO” and “Full”. 4. FAV Accesses the favourite channels lists. 5. TV/RADIO Switches between TV and radio mode 6.
3. INSTALLING THE BATTERIES Fig. 2 Open the cover on the remote control and insert 2x AAA batteries into the compartment. The correct position of batteries polar diagram is shown inside the batteries compartment. 1. Open the cover. 2. Insert the batteries. 3.
NOTE: The Standby function on the remote control is limited or not possible if there are obstacles between the remote control sensor and the front panel of the receiver. If only the Standby button is working, but there is no reaction when you press other buttons, the batteries may be empty, the USB adapter was removed or, as mentioned earlier, you need to pair the USB adapter to the remote control manually.