Care And Cleaning; What To Do If - Electrolux EHE 30200 User Manual

Hide thumbs Also See for EHE 30200:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 9
• Put cookware on a solid hotplate be-
fore you start it.
• Stop the solid hotplate before the end
of the cooking time to use residual
heat.
• For satisfactory results, the bottom of
pans must have the same dimensions
(or slightly larger) as solid hotplates.
Do not use smaller pans.
Use pots and pans with bottom appli-
cable to the dimension of burner.
Cooking
area
Front
Rear

Care and cleaning

Clean the appliance after each use.
Always use cookware with clean bottom.
Warning! Before any maintenance or
cleaning can be carried out, you must
disconnect the hob from the electricity
supply.
The hob is best cleaned while it is still
warm, as spillage can be removed more
easily than if it is left to cool.
Warning! Sharp objects and abrasive
cleaning agents will damage the
appliance.
For your safety, do not clean the appli-
ance with steam blasters or high-pres-
sure cleaners.
The stainless steel can become tarnished if it
is too much heated. Refer to this you must
not cook with potstones, earthenware pans
or cast iron plates. Do not use aluminium foil
to prevent damage the top during operation.

What to do if...

Problem
The appliance does not operate. • Start the appliance again and set the heat setting in 10 seconds.
Diameters of cookware
max. 145 mm
max. 180 mm
• Examine the fuse in the electrical system of the house in the fuse
box. If the fuses blow time after time, speak to an authorised
electrician.
Examples of cooking applications
Heat
setting:
1
2
3
4
5
Bringing to the boil
6
Bringing to the boil / quick frying /
Stainless steel parts wash with water, and
then dry with a soft cloth.
Scratches or dark stains have no effect
on how the appliance operates.
Removing the dirt:
1. Use the fine scouring powder or a scour-
ing pad to remove the dirt.
2. Clean the appliance with a damp cloth
and some detergent.
3. Heat the hotplate to a low temperature
and leave to dry.
4. To maintain the hotplates, rub in a little
sewing machine oil now and again and
then polish off with absorbent paper.
Important! For stainless steel edges of the
hob use cleaner for stainless steel.
The stainless steel edge of the plate can
be slightly discoloured as a result of the
thermal load.
Possible cause and remedy
electrolux 13
Use to:
Keeping warm
Gentle simmering
Simmering
Frying / browning
deep-frying

Advertisement

Table of Contents
loading

Table of Contents