Rotating The Dolly Tabs - For Use With The Acc Dolly - JBL VTX Series User Manual

8.1 ROT A TING THE DOLL Y T ABS - FOR USE WITH THE ACC DOLL Y
There are two dolly tabs available at the front of the B18 that are used to secure the front face ACC dolly board to the B18. The tabs
are retractable and ship from the factory oriented towards the inside of the B18. This orientation is ideal when B18s are used with the
vertical transport cart, in which case the tabs are not needed. When the B18 is used with front face dolly boards the tabs are rotated, so
that the dolly board can be attached to the subwoofer.
STEPS:
• Remove the four M6 HEX screws holding the grill onto the B18.
1
• Carefully disconnect the Molex
2
2
TOOLS REQUIRED: A 4 mm HEX key is required to remove the four M6 screws holding the grill on the B18. A Phillips
#2 screwdriver is required for removing the four Phillips screws holding the bracket.
connector which is used to connect the two front NL4 connectors to the B18.
TM
18
VTX B18 | User Manual
1