Clock & Alarm - Eagle Map Guide Installation And Operation Instructions Manual

select "CLOCK ALM SETUP" and press the right arrow key. The screen
shown below left appears. Now press the right arrow key. The screen
below center appears. Using the arrow keys, enter the alarm's time. Press
CLOCK ALARM CLOCK ALARM CLOCK ALARM
MENU ADJUST MENU SET
the ENT key. The unit returns to the clock alarm menu. Highlight the
"CLOCK ALM OFF ON" menu and press the right arrow key to turn it on.
Press the EXIT key to erase the menus. The unit returns to the group with
the alarm's time showing in the clock's window.
Group I
This group has estimated time enroute (ETE) at the
top of the screen, a trip timer, estimated time of arrival
(ETA), and the digital clock.
The trip timer measures the total time you have been
travelling. It starts counting when you exceed a preset
speed. The default is 5 miles per hour. You can adjust
this time from zero to 200 m.p.h.. To do this, press the
MENU key, then select "TRIP TIMER SETUP" menu.
The screen at right appears. Highlight the "START GS"
label, then press the left or right arrow keys until the
desired speed appears. Press the EXIT key to erase
this screen.
TRIP TIMER MENU
24