Wolf 39239 Series Mounting Instructions page 27

KGXD - 110 - 1000 horizontal
Push the plate elements into position (make sure they are
flush with the outside edge of the support frame) and fill with
sealing compound on the whole perimeter in the groove
provided before screwing.
(See also the manufacturer's assembly instructions)
Join the plate elements with the aid of the supplied brackets.
(See also the manufacturer's assembly instructions)
Screw the plate elements together in the end position. (See
also the manufacturer's assembly instructions)
Insert the stop rail with supports; temporarily fasten them
above or below. These are centred in the supports by the 4
corners of the element. The stop rail must then be complete-
ly removed again in order to install the bypass sheets.
3062937_201508 27