Wolf 39239 Series Mounting Instructions page 20

KGXD - 170 - 1000 upright
Completely remove the panels on the access side.
(including door and intermediate stop rail)
Note the divisions of the panels and mark them if necessary
in order to keep the same position when reinstalling. Pay at-
tention to different panel widths.
Remove the central frame sections (2 pieces).
To do this, remove the bolts on the front and rear sides of the
sections.
The casing is now freely accessible.
Insert individual bypass parts into the casing to the rear wall.
Pay attention to the bypass side. Openings of the upstands in
the bypass direction.
20 3062937_201508