Using Qgpsflashtool To Upgrade Firmware - Quectel L76 Series User Manual
Gnss module
Hide thumbs
Also See for L76 Series:
- Hardware design (60 pages) ,
- User manual (26 pages) ,
- Reference design (9 pages)
Table of Contents
Advertisement
6
Using QGPSFlashTool to Upgrade
Firmware
Quectel L76 series module supports firmware upgrade via UART interface by using the QGPSFlashTool.
Download the QGPSFlashTool from our website Download Zone.
Before you start the firmware upgrade process:
First: Connect the EVB to a PC using a Micro-USB cable.
Second: Set the power switch (S201) to ON position to power on the EVB and switch S301 to USB.
Firmware upgrade steps:
Step 1: Open QGPSFlashTool. Click "Config", then select "Options" as shown in the figure below.
Step 2: In the Options popup, set the number of channels to be used. In the "Tool Options" drop-down
list, select "L76"
Select "L76" for all L76 series modules including L76, L76-L and L76-LB.
2
L76_Series_EVB_User_Guide
Figure 24: Firmware Upgrade – Step 1
, then click "OK" as shown in the figure below.
2
GNSS Module Series
27 / 31
Advertisement
Table of Contents
