Advertisement
CARE AND MAINTENANCE
You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner and soft
cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture,
make sure you have the power turned off and do not spray liquid cleaner directly onto the bulb,
socket, ballast, or wiring.
TROUBLESHOOTING
Minor problems often can be fixed without the help of an electrician. Before doing any work on the
fixture, shut off power supply at the circuit breaker panel to avoid electrical shock.
PROBLEM
Fixture doesn't light.
Light flickers on
and off.
Fixture on all night.
Motion sensor
activates at random
or for no reason.
Motion sensor does
not activate at all.
Motion sensor activates
during daylight.
Detection range
varies from day to day.
POSSIBLE CAUSE
1. Batteries are defective.
2. Battery compartment cover
is loose.
3. Batteries installed wrong.
1. Photo sensor is picking up
extraneous light.
1. Heat source in detection area.
2. Reflective body in detection
area.
1. Minor sensor problem.
2. Momentary heat source or
reflective body.
1. Depleted batteries.
2. Setting has been set to "OFF."
1. Dusk-to-Dawn setting is set
incorrectly.
1. Changes in meteorological
conditions.
CORRECTIVE ACTION
1. Replace batteries.
2. Check battery compartment
cover.
3. Install batteries correctly.
1. Reset photo sensor settings.
1. Remove heat source or move fixture.
2. Remove reflective body or move
fixture.
1. Remove batteries to reset sensor.
2. Turn sensor detection field away
from source.
1. Check or replace batteries.
2. Check setting.
1. Adjust Dusk-to-Dawn setting.
1. Adjust sensor's position.
6
Lowes.com
Advertisement
