Advertisement
Quick Links
Utilitech & UT Design® and Grounded in Quality® are
registered trademarks of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Serial Number:
Questions, problems, missing parts? Contact the customer service department at
1-866-994-4148, 8 a.m. - 6 p.m., EST, Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday.
AB13434
BATTERY OPERATED LED
Purchase Date:
1
MOTION SENSOR LIGHT
MODEL #GU8002-LED-DC
Lowes.com
ITEM #0231039
Français p. 7
Español p. 13
Advertisement
Related Manuals for Utilitech GU8002-LED-DC
Summary of Contents for Utilitech GU8002-LED-DC
- Page 1 ITEM #0231039 BATTERY OPERATED LED MOTION SENSOR LIGHT MODEL #GU8002-LED-DC Utilitech & UT Design® and Grounded in Quality® are registered trademarks of LF, LLC. All Rights Reserved. Français p. 7 Español p. 13 ATTACH YOUR RECEIPT HERE Serial Number: Purchase Date: Questions, problems, missing parts? Contact the customer service department at 1-866-994-4148, 8 a.m.
-
Page 2: Package Contents
PACKAGE CONTENTS PART DESCRIPTION QUANTITY PART DESCRIPTION QUANTITY Fixture Rear Housing Cover Reflector Head Motion Sensor Control Knob Motion Sensor Dusk-to-Dawn Control Knob HARDWARE CONTENTS (shown actual size) Anchor Qty. 2 Wood Screw Qty. 2 PREPARATION Before beginning assembly of product, make sure all parts are present. Compare parts with package contents list and diagram above. - Page 3 ASSEMBLY INSTRUCTIONS 2. For best results, select a site to mount the fixture 6 to 7 feet above the ground. Do not mount light near other sources of heat that lie in the detection area (i.e. dryer exhaust vents, lights, etc.) or reflective surfaces (i.e. pool water or white walls).
- Page 4 ASSEMBLY INSTRUCTIONS 5. Re-attach the LED security light body to the mounted rear housing cover (D) by angling the bottom away from the mounted rear housing cover (D) and engaging the two (2) tabs at the top rear edge of the fixture (A) into the corresponding openings in the rear housing cover (D).
-
Page 5: Battery Replacement Instructions
OPERATING INSTRUCTIONS 4. The motion sensor feature can be adjusted using the knob on the left side of the light. There are four (4) settings: ON- Allows the lights to stay on indefinitely. This setting should also be used to check the status of the batteries. If the lights do not come on when set to the ON position, the batteries need to be replaced. -
Page 6: Care And Maintenance
CARE AND MAINTENANCE You may want to periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. Do NOT use solvents or cleaners containing abrasive agents. When cleaning the fixture, make sure you have the power turned off and do not spray liquid cleaner directly onto the bulb, socket, ballast, or wiring. -
Page 7: Warranty
Monday - Thursday, 8 a.m. - 5 p.m., EST, Friday. PART DESCRIPTION PART # Wood Screw HDW8002 Anchor HDW8002 Printed in China Utilitech & UT Design® and Grounded in Quality® are registered trademarks of LF, LLC. All Rights Reserved. Lowes.com...