Advertisement
2
1
9
Shoulder Strap
Installation
pro MP | MPA
10
4
3
6
7
Surface
1
Built-in Screen
Protector
2
O-ring Seal
3
VESA 100
Compatible
4
Button Access
5
Power & USB-C
Ports Access
6
Camera & Flash
Opening
7
MagConnect Port
(1/4"-20)
8
Rotating Hand
8
Strap & Kickstand
Compartment for
9
Shoulder Strap
(Optional)
10
Latches
5
VESA 100
Installation
for
Go
Advertisement
Table of Contents
Related Manuals for aXtion pro MP
Summary of Contents for aXtion pro MP
- Page 1 MP | MPA Surface Built-in Screen Protector O-ring Seal VESA 100 Compatible Button Access Power & USB-C Ports Access Camera & Flash Opening MagConnect Port (1/4"-20) Rotating Hand Strap & Kickstand Compartment for Shoulder Strap (Optional) Latches Shoulder Strap...
- Page 2 MP | MPA Surface Installation Guide Open the latches... Ensure the O-ring is seated into the channel around the case. O-ring Place water test paper inside, face down to the front of case/ screen side. Close the case. Ensuring all latches are completely closed.
- Page 3 MP | MPA Surface Water Test Passed Place water test paper inside, face down to the front of case/ screen side. Install the Surface Go into the front case ensuring proper alignment. Close the case like steps 3 & 4.
- Page 4 YOUR DEVICE. This aXtion Pro case is designed only for the device type listed on the box. Thus it is only intended for and only warrantied for proper use with that specific tablet and not for use with another device type. Because different generations of tablets have different specifications, please refer to the packaging for your aXtion Pro case to determine whether your tablet will be compat- ible with the aXtion Pro case you have purchased.
Need help?
Do you have a question about the pro MP and is the answer not in the manual?
Questions and answers