Behringer DIAMOND DOME DD610 Quick Start Manual page 13

24
DIAMOND DOME DD610
Display
(1) (2) (3) (4)
(5) (6) (7) (8)
Display Functions
Press the MENU button to access menu options, keep pressing MENU to toggle menu items. Press the ENTER button to access desired
functions and the display will flash, then use the UP/DOWN buttons to navigate and select the desire setting. Press ENTER to save and
confirm, or press MENU to go back without saving.
The main functions are as follows:
Menu Options and Settings
/
Item No. Silkscreen Function
Activates main menu and toggles
1 MENU between menu items. Closes an
open submenu without saving
Decreases the displayed value by
2 DOWN
one/ Navigate function
Button:
Increases the displayed value
3 UP
by one/ Navigate function
Enter selected function/
4 ENTER
Confirm and save
5 DMX Flashes when in DMX mode
6 MASTER Flashes when in MASTER Mode
LED:
7 SLAVE Flashes when in SLAVE Mode
Flashes when in
8 SOUND
Sound Active Mode
Description
DMX Address code selection 001 to 512
DMX Channel selection 4/ 11 Channel mode
Activate MASTER (HOST) mode option
Activate SLAVE mode: when connected to
DMX input, slave unit will replicate the
master (HOST) unit
Activate SHOW mode. Select AU1-16 to
select among 16 preset shows and A0 for
random show
Turn SHOW mode off
Speed, low to high
Turn SOUND CONTROL mode ON. The LED light
will follow the rhythm of the music
Turn SOUND CONTROL mode OFF
Select sound sensitivity of SOUND mode from
low to 100 high
Menu Options and Settings
The led display is always bright
The led display will turn off after 5-10 seconds. Touch it to turn it on again
The led display in forward direction
The led display in opposite direction
ENTER to confirm, and the led display will flash, and enter into LED test mode.
Press ENTER to exit test mode
25
Quick Start Guide
Description
LED dimmer, brightness 0-100%
Strobe speed 0-100%, 0 = no strobe
Red dimmer 0-100%
Green dimmer 0-100%
Blue dimmer 0-100%
White dimmer 0-100%
Amber dimmer 0-100%
UV dimmer 0-100%
Manual rotation
Displays the hours of accumulated working
time
The version of software