Pegasus Astro Dual Motor Focus Controller v3.x Manual page 13

Motor Settings - New Position
If you need to change the current position of the controller, you can do it through this option.
Locate the "Set New Position" field, type the new desired position and click Set button on the right.
Controller will set as new position the value you typed.
Please note: controller will not move the motor. Controller will only change the value of the
reported current position. This feature is very useful when you need to zero the position of the
focuser or set another value.
You can also zero the position of the focuser by clicking the
Position Presets and Motor Rates
You can easily set and save custom names and step values. Right click each position preset or rate and a popup
window will appear. Type the desired step count and click OK button.
13 Pegasus Astro – Copyright 2021
button at the top taskbar of the application.