Viewing Basic Information (Indoor Models Only); Resetting The Water Heater - Navien NPN-160U User's Information Manual

3.3 Viewing Basic Information
(Indoor Models Only)
To view information about the water heater, press
the Information button.
Press the + or – buttons to switch between the
information types.
Display
Flow rate in gallons per
minute (GPM).
Hot water outlet temperature
(OUT).
Cold water inlet temperature
(IN).
To exit information mode, press the Reset button.
12 Operating the Water Heater
Description

3.4 Resetting the Water Heater

If an error message appears, you can try resetting
the water heater to resolve the problem. To reset the
water heater, press the Reset button.
For outdoor installation models, press the OK button
once and "RST" will be displayed on the LCD display.
If resetting the water heater does not solve the
problem, refer to the Troubleshooting section of this
manual or contact Technical Support at 1-800-519-
8794.