Advertisement
8. Lock the brake.
9. Guide the cable alongside the underside of the hand crank and fix it to the lock (Fig. 6).
10. Release the brake, apply the hand crank until the cable is tense again.
Disassembly
To disassemble the extension bar, follow the assembly steps in reverse order.
Important Note:
Reproduction and any commercial use (of parts) of this operating manual, requires a written permission
of WilTec Wildanger Technik GmbH.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Picture 6
Ready!
Item 50789
Page 8
09
2021-1
Advertisement
