Advertisement
REATTACHING THE
REFRIGERATOR DOORS
To reattach the fridge doors, assemble parts in
reverse order.
1. The Water Line must be fully inserted to the
center of transparent coupler (Type A) or the
Guide Lines (Type B) to prevent water leakage
from the dispenser.
Type A
Type A
Center of Transparent coupler
Center of Transparent coupler
DISASSEMBLE THE FLEX DOOR
1. Take out the Flex Zone ( 1 ) by lifting it up.
2. Take off the cover ( 2 ) w/harness with a flat-
blade screwdriver (-).
3. Press the locking tab and separate the Wire
Connector.
DA99-03404D-11.indb 09
DA99-03404D-11.indb 09
Type B
Type B
Dispenser
Dispenser
The Guide Lines
The Guide Lines
1
2
When reassembling it, be sure to connect the
wire harness.
CAUTION
If it is not connected, the Flex Room does not
work.
4. Remove 2 hex head bolts from sides with a
socket wrench (10 mm)
5. Lift up the Flex door from the rails.
Putting too much food into the freezer
drawers can prevent the freezer from closing
CAUTION
completely and can cause frost build-up.
ASSEMBLE THE FLEX DOOR
To reattach the fl ex door,assemble parts in reverse
order.
Be sure to connect the Flex Door Wire
Connector.
CAUTION
If it is not connected, the Flex Room does not
work.
setting up _09
2015. 5. 7.
2015. 5. 7.
8:10
8:10
Advertisement
