Kongsberg Simrad RA83 Instruction Manual page 125

RA83/84/85/93/94/95 Series
Operation Manual
(5) Move the Joystick up or down to highlight the number shown right to the words
POSITION NUMBER and press the ENT key. The number will blink.
(6) Select a desired mark by pressing a numeric key (0 - 9)
(7) Use the N/S/E/W and numeric keys (0 - 9) to enter the latitude and longitude
coordinates. If a correction is needed, move the Joystick left or right to highlight
the part for correction and enter new data.
(8) Press the ENT key to fix the entry. The blinking alphanumeric data will become
stationary.
(9) To continue the entry of position data for other position numbers or change the
data, repeat the step (5) and after.
Table 7.5 MARKS USED IN THE MAP
No.
0
1
2
3
4
5
6
7
93142105-02
Mark shape Applicable objects
Light
Lighthouse, Aeronautical
light, Light beacon, etc.
Buoy
Large mooring buoy
Radio and/or radar station
Dry rock
Awash rock
Reef, submerged rock, etc.
Chapter 7
Graphic Displays
7-7