What To Do If - Smeg BLF01 Instruction Manual

4.6 What to do if...

Problem
The motor will not start
The blender vibrates
Cleaning and care
Possible cause
The motor has overheated.
The plug is not properly
inserted in the power socket.
The cable is defective.
Lack of power.
The blender is not resting on a
stable surface.
The anti-slip rubber feet are
worn.
The speed used is too high or
the load is excessive
Solution
Unplug the blender and
leave the motor to cool.
Insert the plug into the power
socket. Do not use adaptors
or extensions.
Check that the house main
breaker is on.
Contact an Authorised
Service Centre.
Check that the house main
breaker is on.
Place the blender on a flat,
stable surface.
Have them replaced at an
Authorised Service Centre.
Set a lower speed and
ensure the jug has not been
overfilled.
69