Advertisement
Available languages
Available languages
• If the wall mount's fixers are not fixed to the end as shown in the figure, subtle impacts may move the TV. In this
case, make sure to install the fixers properly so that they are fixed to the TV all the way to the end.
• You do not need to use the cable guide (
• Cable guide (
) double-sided tape may not stick or may not stick well depending on your wall surface (ex.: uneven)
or material. It may also lose stickiness over time under some installation conditions.
• Cable guides (
) may harden if stored in a cold place. In such cases, keep them at room temperature (around 20
degrees) for 1-2 hours.
• When removing cable guides (
chipped, etc.)
• When attaching cable guides (
prevent damage to the cable guide due to the distance between the TV connector and wall.
• Be careful that the cable is not damaged when removing, moving, inclining, or horizontally adjusting the TV while
the power and and optical fiber cable are connected using cable guides (
• To prevent cable damage when dismounting the TV from the wall, disconnect the power cable and the optical cable
before removing the wall mount.
• If you have used the cable cover, first disconnect the power cable and the One Connect cable from the TV, and then
remove the TV from the wall mount.
). Use it depending on the installation condition.
), the wall may be damaged in some surroundings. (Ex.: wall surface chipped, paint
) to the wall, we recommend installing at least 30 mm from the TV connector to
- English 6 -
).
Advertisement
