Led Light Replacement - Xo XOP30SC Manual

maintenance continued
FOR UNITS USED IN RECIRCULATION MODE ONLY:
This refers to hoods which are not ducted outside but rely instead on carbon filter elements
to help purify the air before it is exhausted back into the room.
The carbon element filters gradually lose efficiency and cannot be cleaned or regenerated.
These must be replaced at least 4 times a year, more frequently if needed based on the
amount of use and style of cooking.
CHANGING THE CARBON FILTERS:
Changing the filters is easy.
To Reduce the Risk of Fire and Shock use only
conversion Kit Model XORFND
The XORFND filters are sold in pairs.
To replace the filters, unlatch and remove the
Anti-Grease filters.
This will expose the blower.
One Carbon Filter attaches to each side of the
blower.
Remove the old filter by rotating one quarter turn
counter-clockwise and pull straight away
from the blower.
To install the new filter simply align, push into pla-
ce and rotate one quarter turn clockwise to lock.
XOPSPK6509
Filters.
(ACK00059)

LED LIGHT REPLACEMENT

To replace the bulbs, rotate the lamp anticlo-
ckwise as shown in Figure. Replace the bulbs
with new ones of the same type.
- 20 -
XORFND
(UL REFERENCE ACK00059)