Switching The Gain - Nokia RH-57 Series Troubleshooting Manual

Nokia Customer Care

Switching the Gain

Use the following steps if the receiver is not working properly and you need to switch the
Rx gain state.
1. Open the Phone Control dialog box.
Figure 15: Phone Control dialog box for switching the Rx gain state
2. Click the LOCAL button in the Phone State area to put the phone into Local
Mode.
3. Select the following values on the RF Main Mode dialog box:
• Band = Cell (CDMA)
Channel = 384
•
Mode = Rx
•
Figure 16: RF Main Mode dialog box for switching the Rx gain state
4. Click Set.
Note: Be sure that the "RF Main Mode set successfully..." message appears in the status bar.
Issue 1 07/2004
©2004 Nokia Corporation
Troubleshooting - RF
Company Confidential
2112 (RH-57)
Page 25